2 inch steel nail making machine is an industrial device used to manufacture steel nails from wire. These machines can vary in terms of automation, capacity, and complexity, and they are essential for producing nails used in construction, carpentry, and various other applications. Dingsheng machine manufacturer can make the whole steel wire nail product line, such as nail polishing machine, nail grinder machine, steel wire drawing machine, butt-welding machine and roller tip machine. Our machine arrived in many countries like Bangladesh, Uzbekistan, India, Ukraine, Russia, Egypt and so on.

Production process of 2 inch steel nail making machine

We should draw the raw material of wire rods of 6.5 mm or 5.5 mm diameter (usually 2-3 tons per coil), to small wire coils (200-300 kg per coil) of diameter such as 4.5 mm, 4.1 mm, 3.4 mm, 2.8 mm, etc needed for making nails by the wire drawing machine, after this, put the small wire coils on a wire reel, from which the steel wire was feed into the nail making machines to make nails, after the wire is cut to nails, it needs to polish the nails to remove the iron dust on the nail shaft and make it become bright and good looking, then packaging.

2 inch steel nail making machine structure:

The main structure of the nail-making machine, including the big wheel, mainframe, motor, discharge hopper, wire feeding mechanism, straightening mechanism, punching mechanism, mold mechanism, nail cutter cutting Mechanism, and gear transmission mechanism.

2 inch steel nail making machine working principle:

• 2 inch steel nail making machine uses Taiwan nail-making technology, by straightening the wire, feeding the wire, cutting to form the nail tip, punching to form the nail cap, and so on to make nails.
• 2 inch steel nail making machine is a fully automatic machine for the production of wire nails. It is powered by a motor. There is a switch on the machine. After the machine is turned on, according to different wire diameters, a coil of iron wire can be used for 4-8 hours without stopping.
• Z94 nail producing machine, controlled by a switch, works without a frequency converter and control cabinet, It is simple operation and speed non-adjustable.

How to make nails with 2 inch steel nail making machine?

1. Wire Drawing: Draw the wire rods from 6.5/5.5mm to a smaller diameter for example 4.5mm, 3.4mm for making nails.
2. Nail Making: Feed the 4.5/3.4mm black steel wire to make nails.
3. Nail Polishing: Add sawdust in the nail polishing drum to polish the nails and make them bright.
4. Packing: Packaging the nails in bags or cartons.
5. The nail making machine is the most important equipment in the nail making process. If there is already drawn iron wire available, then only a nail production machine itself can
6. complete the nail-making job. According to the different nail sizes that need to be made, choose the appropriate nail machine model.